This page was exported from Amplex Support [ https://support.amplex.net ]
Export date: Mon Mar 20 15:04:30 2023 / +0000 GMT

How To Connect Your Amplex Phone To Your Home Phone Wiring



Connecting your Amplex Phone service to your existing home phone wiring is easy. All you will need is a screw driver and a few minutes to connect your Amplex Phone to your home's wall phone jacks. Start by locating your telephone wiring box (called a NID or network interface device) which is usually located on the outside of your home or inside of your garage. This box is grey or off white in color and may say Telephone Network Interface or Network Interface Unit on it. Below are two examples of what it may look like.

nidbox-878x1024

 

nidbox1-855x1024

On the wiring box you should see a small access screw. Loosen this screw to open the box. Inside of the box you will see a standard telephone jack with a small telephone cable plugged into it. Unplug this cable to disconnect the telephone companies signal from your home. If you have a multiple line phone wiring you may need to disconnect multiple connectors. Close the box and tighten the access screw.

nid1-1024x819

nidclose-1024x675

Some wiring boxes will have a clip or block style system as pictured below. To disconnect the telephone companies signal unlatch the connector. If you have a multiple line phone wiring you may need to disconnect multiple connectors. Close the box and tighten the access screw.

nid2-close-849x1024

 

 


Post date: 2015-10-21 11:50:41
Post date GMT: 2015-10-21 16:50:41
Post modified date: 2018-04-17 13:03:28
Post modified date GMT: 2018-04-17 18:03:28

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com